Jining Guolong Materials Co., Ltd.

Type broken belt catcher
Broken belt catcher for belt conveyor
Broken belt protection device Broken belt catcher
Type broken belt catcher for belt conveyor (hereinafter referred to as broken belt catcher), this product fills the domestic gap, improves product performance, expands the scope of protection, and is widely used in belt protection of conveyors running in mining, metallurgy, electric power, ports and terminals, etc. It is especially suitable for strong or ordinary belt conveyors going uphill with large inclination angles, large transport volumes, and long distances. When the belt conveyor breaks or the backstop fails, the broken belt catcher can quickly catch the heavy and empty sections of tape that suddenly slide down after the tape breaks or loses control, and has the function of preventing the tape from running off. It can function as a tape cassette when needed
Working principle
Belt break protection devices are installed at multiple locations along the belt conveyor. When the belt is running normally, the one-way roller in the middle rotates with the belt, and the left and right rollers rotate with the belt. The wedge-shaped brake block is located below the belt and does not contact the belt. The upper brake block is adjusted to both sides of the belt and is longitudinally parallel to the belt. When a belt break occurs, the sliding upper brake block quickly rotates to the top of the belt, and the wedge-shaped brake block continues to move along the wedge-shaped groove, clamping and braking the sliding belt between the upper brake block and the wedge-shaped brake block.
Performance features
, wedge self-locking brake belt, no external power required
, brake block and belt surface contact, large braking surface, will not damage the belt
, upper brake block It can swing, open, and telescopically adjust up and down. The bolts above the upper brake block can be adjusted according to the load capacity, and the length of the upper brake block extending into the belt can be set. Key components are galvanized to prevent corrosion.
The integrated mounting bracket is strong and easy to install.
. Belt breakage alarm device can be equipped according to user requirements.
Related parameters
, single-side braking width (adjustable)~
, rated braking power/set
, protection device damage load
, broken belt sliding distance~
Applicable working conditions
, upper transport belt conveyor with bandwidth of ~
, rigid frame and hanging belt conveyor
, inclination angle of belt conveyor
br/>. The groove angle of the grooved roller is suitable for various groove angles. When inspecting, adjusting, and replacing parts, the machine must be stopped and the power supply must be cut off.
. The number and spacing of the broken belt catchers installed on the conveyor should comply with the regulations in the table. Otherwise, reliable catching and protection will not be guaranteed.
After arresting, you should pay attention to
The belt should be handled promptly after being captured by the broken belt catcher, and do not leave the belt and the catcher in the catching state for a long time.
First of all, check whether the broken belt catcher is deformed and whether each weld is open. If problems are found, replace them promptly. At the same time, check whether the fasteners are loose and tighten them all.
Check whether the friction plate assembly and the backstop roller are flexible and reliable in operation, without any blockage, and whether the fit is loose. If any problem is found, it is strictly prohibited to use it and replace it in time.
The maximum allowable installation spacing for different belt strengths, bandwidths and inclinations
Belt strength
Bandwidth
The maximum allowable installation spacing on belt conveyors with different inclinations
~&
~&
~&
~&
~&
≧
~
















< br/>










●Customized Power
Project
Basic parameters and dimensions
/type
/type
/type
/type
/type
Conveyor Bandwidth,





Single side braking width,



Customized Motivation,






Contact Manager Zhang
Cell phone
Phone