Jining Guolong Materials Co., Ltd.

Speed slip detector, slip detector, Jining slip detector
This device consists of a sensor and a control box. It adopts micro-single-chip computer technology and has good stability and anti-interference. It is suitable for belt type Where conveyor belt speed needs to be detected, it is an ideal detection and control device. There are two models, the difference is that the model has a five-digit digital display and analog output.
Type slip (speed) detector
Product introduction
1. Overview
Type slip (speed) detector is a belt improved and developed by our company based on the use of speed relays. Conveyor stall protection device. The core device of this device uses a microcomputer chip, which is an intelligent detector with high technical content and extremely low power consumption. It can accurately monitor whether the tape speed is normal during the operation of the tape machine. It is more stable and reliable than the previous slip detector.
2. Main purposes
Used to detect slippage between the belt and the driven roller during operation of the belt conveyor to prevent vicious accidents caused by slippage.
3. Main technical indicators
Detection speed range
Contact capacity
Sensor and tape speed error
Slip rate setting range
.~.m
Seconds

﹤.%
%
4. Working principle
The detector is in close contact with the tape through the touch wheel. When the touch wheel and the moving tape move, When the linear speed is moving, the internal detection sensor of the device is continuously blocked by the infrared receiving and transmitting light source, and outputs a pulse signal, which is photoelectrically isolated and then enters the counting unit. At the same time, it reflects the actual belt speed of the tape. The movement information of the tape is input into the pulse signal of the microcontroller through the infrared photoelectric sensor. After receiving the information, the microcontroller performs calculation and judgment processing to monitor the stall situation of the running tape. When the speed of the running tape is lower than % of the normal speed, a switch signal is sent out, and the user This switch signal can be used to implement stall shutdown in its own control network to prevent production accidents caused by tape slippage.
Type slip (speed) detector setting device uses a dial switch to set the belt speed value and slip limit. The overall structure can be installed at any position of the tape machine. It has the characteristics of no wear on the touch wheel and tape, fast response speed, high precision, small error, and convenient installation and adjustment.
Our company's main products are mine support products
Anti-overflow skirt
Buffer strip
Buffer bed
Saw-tooth ring
Spray sprinkler dust reduction device
Air door lock
Fire door fence door fire fence dual-purpose door.*. Fence fire door airtight door.*mine airtight door
Resin asbestos-free brake belt
Chute clogging detector belt lengthwise Tear detector
Longitudinal tear detector Material level meter Speed slip detector Slip detector
Two-way pull rope switch
Pull rope switch
Material flow detector
Deviation switch mine deviation switch Flameproof deviation switch
Belt deviation sensor
Touch sensor
Deviation sensor
Smoke sensor
Coal stack sensor temperature Sensor Pressure Sensor
Contact Manager Zhang
Mobile Phone
Telephone